Wardrobe and alcove panels cut to size
Building a fitted wardrobe or alcove cupboard? We cut the carcass panels, shelves, dividers and plinths to your exact sizes, edge them to match and drill shelf-pin and hinge holes on our CNC – ready to assemble in your room.
- Any height, width and depth
- Shelf-pin lines drilled on our CNC
- Doors and sliding doors too
Floor to ceiling, wall to wall
A built-in wardrobe uses every millimetre of the space – including sloping ceilings and awkward corners. We cut the parts to your sizes so the carcass fits snugly between the walls, with no wasted gaps.
- Sides and dividers – full height, in 18mm MFC.
- Shelves and hanging rail sections – cut to your internal widths and edged on the front.
- Plinths, top panels and scribe strips – to finish against floors and ceilings.
- Doors – hinged doors or made-to-measure sliding doors.

Cupboards and shelves either side
Alcoves beside a chimney breast are rarely square or the same size, so off-the-shelf units leave gaps. Measure each alcove separately and we cut the parts to fit.
Lower halfAlcove cupboardsCarcass sides, tops and shelves with doors, cut to each alcove's width and depth.
Upper halfAlcove shelvesShelves cut to the exact width of the alcove. Check how far they can span with our shelf span calculator.
Room photos: projects fitted by our sister company, ABJ Kitchens & Bedrooms.
Finished in your decor
- MFC – ready finished in woodgrains and plain colours, no painting needed. MFC cut to size.
- MDF – for alcove units you want to paint to match the room. MDF cut to size.
- Edging – ABS edging matched to your decor with PUR glue, usually 1mm on carcass edges and 2mm on doors.
- Drilling – shelf-pin lines, hinge cups and cam and dowel holes on our CNC.

Wardrobe panels in four steps
Measure in millimetres, in more than one place – walls and ceilings are rarely perfectly straight.
Measure the space
Width at top and bottom, height at each end, and depth.
We cut, edge and drill
Standard 18mm boards are usually ready in 1–5 working days.
Collect or delivery
Collect free from Fengate, or we deliver within around 35 miles.
More for the bedroom
- Sliding door designer – design and price sliding doors.
- Doors and drawer fronts – cut, edged and drilled.
- Shelves cut to size – for any room.
- Shelf span calculator – avoid sagging shelves.
Frequently asked
Can you cut a built-in wardrobe carcass to size?
Yes. We cut wardrobe sides, dividers, shelves, tops and plinths to your exact sizes in 18mm MFC, edge them and can drill shelf-pin and hinge holes, ready to assemble.
What board should I use for alcove cupboards?
18mm MFC is ready finished and hard-wearing. Choose MDF if you want to paint the units to match your walls.
My alcoves are different sizes – is that a problem?
Not at all. Measure each alcove separately and list the parts for each one – we cut every panel to its own size.
Can you supply wardrobe doors too?
Yes – hinged doors cut, edged and drilled, or made-to-measure sliding doors with GTV Nero, Novo S or Vista frames.
How quickly can you cut wardrobe panels?
Standard 18mm boards are usually ready in 1–5 working days. We do not usually offer same-day cutting, but call us if your job is urgent.

